zerona Z6, Manual

Page: 29 / 44

ZERONA Z6 OTC OPERATION | 24
ZERONA®-Z6 OTC TREATMENT PROTOCOL
Now that you understand how to operate the Zerona Z6 OTC device and how to position the diodes
properly, the following section describes the steps to follow each time you administer a treatment
with the device to a client. You will need to administer six treatments with the Zerona Z6 OTC
device to the client over two weeks. This means three treatments each week, with each
treatment every other day.
Follow the treatment plan example for best results

You must always begin by having the client put on the safety glasses.

Have the client lie comfortably flat on their back on the treatment table so that the front of
their body is facing upwards.

Position the laser diodes properly over the client’s targeted area following the procedure
described in the previous section of this booklet.

Once the diodes are positioned properly in the targeted areas, touch the START icon. With the
lasers on, check the positioning of the heads for coverage of targeted areas as described in the
previous section of this booklet.

When the first 20 minutes of treatment on the client’s front body area is done, the lasers will
pause and the device will alert you with
3 audio beeps.

Raise the laser arm above the client and have the client roll over to lie comfortably on their
stomach.

Lower the laser arm and position the laser diodes properly over the backside of the client’s
targeted area following the procedure described in the previous section of this booklet.

Once the diodes are positioned properly in the targeted areas, touch the START icon again.
With the lasers on, check the positioning of the heads for coverage of targeted areas as
described in the previous section of this booklet.

After the second 20 minutes of treatment for the client’s back body area is done, the laser will
automatically turn off and alert you with
3 audio beeps.
 Raise the laser arm off the client.

The client may get up from the treatment table and remove the safety glasses. Their
treatment procedure is done.

Turn the key to the OFF position.