ZERONA Z6 OTC OVERVIEW & ASSEMBLY | 13
ASSEMBLY DIRECTIONS (CONTINUED)
Once the arm is inserted, gently push it down into
the base until the two pieces are flush and the hole
opening for the locking knob is aligned.
INCORRECT
CORRECT
With the holes aligned, thread the locking knob into
place. This will keep the main head assembly from
unwanted rotation during use.
Access the laser arm cable by pulling the tab on the
upright base cover as shown.
Reach in and pull out the laser arm cable for ease of
connecting.
Summary of Contents for Z6
Page 2: ......
Page 32: ...ZERONA Z6 OTC OPERATION 27...
