zerona Z6, Manual

Page: 11 / 44

GENERAL INFORMATION | 6
PRECAUTIONS
Read, understand, and practice the precautionary and operating instructions. Know the
limitations and hazards associated with using any laser device. Observe the
precautionary and operational decals placed on the device. If you have difficulty
operating the device after carefully reviewing this reference guide, contact our Erchonia
Customer Care representatives for assistance.
DO NOT position equipment so that in an emergency it is difficult to disconnect the
power cord from the electric supply.
DO NOT use sharp objects such as a pencil point or ballpoint pen to operate the buttons
on the touch screen as damage may result.
DO NOT place/operate this device in close proximity (6 inches) to other devices that
emit frequency. If this device causes interference to other devices, which can be
determined by turning the device off and on, you are encouraged to try to correct the
interference by one of the following measures:

Reorient or relocate the receiving device.

Increase the separation between the equipment

Connect the equipment into an outlet on a circuit different from that to which the
other device(s) are connected.
This device should be operated in temperatures between 59° to 85°F (15° to 29°C), and
transported in temperatures between -22° to 158°F (-30° to 70°C), with relative
humidity less than 75%.
There are no user-serviceable parts inside the device except for the fuses. If a
malfunction occurs, discontinue use immediately and contact Erchonia Corporation for
repair service.
Inspect electrical cord and associated connectors before each use. ONLY use the power
cord supplied with the device. Using a different power cord could damage the device