GUIDANCE AND MANUFACTURER’S DECLARATION-ELECTROMAGNETIC EMISSIONS & IMMUNITY | 35
GUIDANCE AND MANUFACTURER’S DECLARATION-
ELECTROMAGNETIC EMISSIONS & IMMUNITY
Medical electrical equipment requires special precautions regarding EMC and must be installed and
put into service according to EMC information provided in this document. Portable and mobile RF
communications equipment can affect the medical electrical equipment.
This declaration currently applies to the Zerona Z6 OTC device.
GUIDANCE AND MANUFACTURER’S DECLARATION-ELECTROMAGNETIC
EMISSIONS
The device is intended for use in the electromagnetic environment specified below. The customer
or the user of the device should assure that it is used in such an environment.
Emissions test
Compliance Electromagnetic environment-guidance
RF emissions CISPR 11
Group 1
The device uses RF energy only for its internal function.
Therefore, its RF emissions are very low and are not likely to
cause any interference in nearby electronic equipment.
RF emissions CISPR 11
Class A
The device is suitable for use in all establishments, including
domestic establishments and those directly connected to the
public low voltage power supply network that supplies
buildings used for domestic purposes.
Harmonic Emissions
IEC 61000-3-2
Class B
Voltage
Fluctuations/Flicker
Emissions IEC 61000-3-3
Complies
WARNING
This device should not be used adjacent to other equipment. If adjacent use is necessary, the
device should be observed to verify normal operation in the configuration in which it will be
used.
The use of accessories other than those specified for the device is not recommended. They may
result in increased emissions or decreased immunity of the device.
Summary of Contents for Z6
Page 2: ......
Page 32: ...ZERONA Z6 OTC OPERATION 27...
