These default screens contain three different fields; DMX, Temp and ChilliNet. These are described as follows:
DMX Field in the Default Screens
The DMX field in the default screen will show the status of the DMX input signal.
Receiving valid DMX dimmer data:
“DMX: xxx” (DMX start address), or
“DMX: Patched”
Receiving invalid DMX data:
“NOT DIMMER”
DMX errors are occurring:
“DATA ERROR”
No DMX data being received:
“NO DATA"
DMX input disabled:
“DMX: DISABLED”
Temp Field in the Default Screens
The Temp field in the default screen will show the status of the temperature sensor. During startup the text “Temp: No
Val” is shown briefly whilst the dimmer is reading the sensor. This is normal behaviour.
Internal temperature sensor fault:
“Temp: No Val”
Normal operating temperature (<80 C):
“Temp: OK”
Hot (80 - 90 C):
Zero 88 - Spice - Page 13 of 47
Printed: 10/03/2021 09:32:33 ES
