The cursor appears in the memory number field (xx). If a memory is currently being output, then that number is shown
in the field.
Use the numeric keypad or cursor keys to select a memory to be output (0 - 12).
Press the ENT key to confirm the memory number selection. The dimmer performs the following:
Memory Zero - The outputs fade to zero in 3 seconds, and replace any previous memory or sequence being
output.
Programmed Memory - The outputs fade to those in the selected memory in the memory’s fade time, and
replace any previous memory or sequence being output.
Unprogrammed Memory – * is displayed and the outputs do not change.
The screen returns to the Play Memory screen.
Memory Zero is a fixed, non-editable memory, with a fade time of 3 seconds and all channels programmed at 0%.
In standard mode, a dimmer can only play back one memory at a time.
ChilliNet Mode
This option allows you to playback (output) one of the 12 memories programmed in the dimmer, or any other dimmer
on the network, on an area basis.
Select the Play Memory option from the Memories menu, and press the ENT key. The screen shows:
Area: 1
Memory: xx
Zero 88 - Spice - Page 20 of 47
Printed: 10/03/2021 09:32:33 ES
