Zero88 Frog, Operating Manual

Page: 17 / 26

Floppy Disk Functions
Select the Floppy Disk option from the
Super User screen and press the
GO/ENTER key. The Floppy Disk
screen is shown on the LCD:
**** FLOPPY DISK ***
{Load Show}
{Save Show}
{Format Disk}v
The Floppy Disk options are:
•
Load Show
•
Save Show
•
Format Disk
•
Exit.
Use the up and down arrow keys to
select the required option. Press the
GO/ENTER key to activate that option.
Load Show
This function loads a show onto the
Frog-Box unit from a floppy disk.
1. Ensure that a disk containing
show files is inserted into the
floppy disk drive.
2. Select the Load Show option from
the Floppy Disk screen. The unit
reads the floppy disk for valid
show files. The LCD shows:
***** LOAD SHOW ****
< Show01.isf >
< 10KB 5/2/2001 >
[Load[ {Cancel}
If the disk contains several shows,
use the + and - keys to select the
required show.
3. Press the GO/ENTER key to load
the show onto the unit. While the
show is loading, the LCD shows:
Loading Show01
Please Wait …
xx% Done.
[Cancel]
4. When the show is loaded
successfully, the LCD shows:
show01 Loaded
[OK]
5. Press the GO/ENTER key to
return to the Floppy Disk screen.
Save Show
This function allows the user to save
the current show onto a floppy disk.
The shows are identified by number
only and are stored on the floppy disk
as “Show01”, “Show02” etc..
1. Ensure that a formatted disk is
inserted into the floppy disk drive.
2. Select the Save Show option from
the Floppy Disk screen. The LCD
shows the following:
***** SAVE SHOW ****
Show No: < 1*>
[SAVE] {Cancel}
An asterisk (*) is displayed next to
the show number if the file does
not exist on the floppy disk. The
Show No defaults to the first
available show on the disk.
3. Use the + and - keys to select the
required show number (01 - 99).
4. Press the GO/ENTER key to save
the show to floppy disk.
5. If the show already exists on the
floppy disk, a warning is displayed
on the LCD:
Show already exists
Overwrite file ?
[OK] {Cancel}
6. Press the GO/ENTER key to
overwrite the file.
7. While the unit is saving the show
to floppy disk the LCD shows:
Saving Show01
Please Wait …
xx% Done.
[Cancel]
8. When the show is loaded
successfully, the LCD shows:
Show01 Saved
[OK]
9. Press the GO/ENTER key to
return to the Floppy Disk screen.
Format Disk
1. Ensure that a floppy disk is
inserted into the disk drive.
2. Select the Format Disk option
from the Floppy Disk screen. The
LCD shows the following:
FORMAT DISK
Are you sure ?
[OK] {Cancel}
3. Press the GO/ENTER key. The
LCD shows:
Formatting Disk
Please Wait …
xx% Done.
[Cancel]
4. When the formatting is complete,
the LCD will show:
Disk Formatted.
[OK]
5. Press the GO/ENTER key to
return to the Floppy Disk screen.
Exit Floppy Disk Functions
1. Select the Exit option from the
Floppy Disk screen.
2. Press the Go/ENTER key. The
LCD returns to the Super User
screen.
NOTES
Load Show
If there is no disk in the drive, no showfiles on
the disk, or the load fails for any reason, an
error message is displayed on the LCD.
Save Show and Format Disk
If there is no disk in the drive, the disk is
write protected, or the operation fails, an
error message is displayed on the LCD.
Frog Box 73-749-00 Issue 4 4 - 3
Super User