Capture the skies.
™
13_
4.
Position your phone in the remotes smart phone
holder.
5.
Switch the remote controls power switch to the
up On position. The remote control should beep
once to indicate power up has been successful.
6.
To activate the connection between the remote
control and the Atlas, move the Left Thumb stick
(Acceleration/Yaw) on the Remote Control to the
lowest (down) position hold for one second and
then return the Left Thumb stick to the middle
resting position. The remote should beep three
times, the lights on the arms of the Atlas should shine solid and the power
indicator light on the Remote Control will shine solid indicating that the
connection has been successful.
7.
Calibrate the Atlas by holding the Right Thumb
stick (Pitch/Roll) in the bottom right position.
This ensures that the Atlas stays level and flies
straight. The Lights on the Atlas will flash fast
while calibrating. Keep holding the Thumb stick
in the bottom right position until calibration is
complete.
If the Atlas starts to fly abnormally, it may need to be re-calibrated. To
recalibrate the Atlas turn the Remote Control and Atlas off and then restart the
Flying Your Atlas
process.
When calibrating the Atlas, please ensure that the Atlas is on a level surface.
8.
Once the remote is paired and the Atlas is
calibrated, the motors will need to be unlocked
before you fly. To unlock the motors move the
left thumb stick to the right and downward
position while also moving the right thumb stick
to the left and downward position as shown in
the diagram below.
When done correctly the rotor blades will spin waiting for take off
PLEASE NOTE:
For a quick take off that will skip the step of unlocking the
motors, press the auto take off button
on the remote control after
calibration. This will instruct the Atlas to take off and hover at shoulder height.
