_12
Capture the skies.
™
3.1.8 USING THE REMOTE CONTROL SMART PHONE HOLDER
1.
Extend the Phone cradle from the top of the drone
2.
Flip down the bottom grip of the phone cradle
3.
Lift the top grip and place your smart phone horizontally between the
two grips.
4.
Release the top grip making sure that your smart phone is securely in
position.
3.1.9 INSTALLING THE ROTOR GUARDS
To install the rotor guards, follow the instructions below.
1.
Slip the rotor guard into position making sure that the pegs are In
position.
2.
Secure the rotor guards with the included screws.
4. FLYING YOUR ATLAS
GETTING STARTED, POWERING UP, PAIRING, CALIBRATING AND
UNLOCKING THE MOTORS
1.
After installing a fully charged battery and installing 4 x AA batteries (AA
batteries not included) into the remote control and conducting a complete
check of your surroundings, hold the power button on the Atlas for two
seconds.
2.
Once on, the LED lights on the arms of the Atlas should flash signalling no
connection to the Remote Control.
3.
On your Android or Apple Smart-phone, open your WiFi settings and
connect to the ZX Atlas WiFi connection. Once connection is made, open
the Zero-X Atlas app on your Smart-phone.
