Zero Motorcycles MX 2012, Owner'S Manual

Page: 57 / 142

4-8
A
Power Pack Swapping
The motorcycles feature a quick change power pack.
This allows the rider to charge one power pack while
using another. Do not operate the motorcycle without
the power rail or rail fastener in place. To change the
power pack, perform the following:
Removal
1. Remove the key from the key switch and safely
support the motorcycle.
2. Disconnect the power pack charging connector (A)
(XU only).
3. Locate the thumb screw (B) (MX Dirt) or T-40
security bolt (C) (X/XU Street Legal). The
security bolt requires the supplied tool (located
under the seat) to remove and install. The security
bolt can be replaced with the thumb screw
available from Zero Motorcycles Accessories. See
image on page 4-9.
4. Pull the power pack rail (A) away from the
motorcycle, unhooking it at the front. See image
on page 4-9.