Zero Motorcycles MX 2012, Owner'S Manual

Page: 104 / 142

5-29
Parts/Maintenance Items
The proper replacement parts, fluids, and lubricants
to use are listed in the chart below.
Zero Motorcycle Accessories
Zero accessories are designed to complement and
function with other systems on your motorcycle. Your
dealer can accessorize the motorcycle using genuine
Zero accessories.
A full line of parts, accessories, and apparel can be
found on the Zero Motorcycles website.
Fuses
Whenever there is an excessive amount of current
flowing through a circuit, the fusible element will melt
and create an open or incomplete circuit.
* Do NOT interchange 12 volt and 80 volt fuses
Fuses are a one-time protection device and must be
replaced each time the circuit is overloaded. Replace
the fuse with one of equal current and voltage rating.
Do NOT interchange 12 volt and 80 volt fuses. If the
fuse melts repeatedly, have the electrical system
inspected by your dealer.
Fuse Center Locations
12 Volt*
X/XU - Street Legal
The 12 volt fuse center is located behind the right
front trim panel. The fuse center has a protective
cover that must first be removed to gain access to
the fuses. To remove the cover, squeeze the
tabs (A) together and lift off the cover.
FUSE # AMP CIRCUITS
CONTROLLED
1 10
Turn Signals, Horn,
Brake/Tail Lights
2 10 Accessory Port
3 10 Headlight, Flash to Pass
4 - Not Used
See image on page 5-30.
PART NUMBER
Headlight Bulb H4 (55/60 watt)
Turn Signal Bulb - MX P21W (21 watt)
Turn Signal Bulb (amber) RY10W (10 watt)
Brake/Tail Light Bulb 1157 (5 watt)
Front Running Light Bulb T4W (4 watt)
Brake Fluid DOT 4