Zero Motorcycles MX 2012, Owner'S Manual

Page: 124 / 142

6-15
A
Stage 1
The motor, power pack, or motor controller begins to
reach an undesirable temperature:
•
A slow flash is clearly seen on the warning
indicator.
•
You can continue to ride without performance
interruptions.
•
You should reduce speed - this will lower power
output and the motor temperature to eliminate the
flashing warning indicator.
Stage 2
If the motor, power pack, or motor controller continues
to heat up:
•
A fast blink is clearly seen on the warning
indicator.
•
The power to the motor begins to drop off,
resulting in a noticeable reduction in available
torque. This provides tactile feedback to the rider
and also helps prevent the component from
heating further. As the component cools again,
full-power will be restored.
•
At this point it is strongly recommended that you
reduce your speed and consider finding a safe
area to stop.
•
You may still have time to back off the throttle to
reduce heat. This will restore full power to the
motor and eliminate the warning indicator.
X/XU