Zero Motorcycles FX 2022, Owner'S Manual

Page: 96 / 164

General Maintenance
6.24
Side Panel - FXE
Note: The left side panel will need to be removed to gain access
to the power pack low power B+ fuse.
Removing the side panel
1. Remove two 2.5mm Hex head screws (A) securing cover to
front panel and remove cover. Torque 8 in·lb (1 Nm).
2. Remove T25 Torx bolt (B) securing front panel to side panel.
Torque - 3.5 lb·ft (5 Nm).
3. Remove two 3mm Hex head bolts (C) and collect washers
securing side panel to front panel. Torque - 2 lb·ft (3 Nm).
4. Remove two cross-head screws (D) securing side panel to
frame.
5. Release side panel from front panel and remove.
Installing the seat
1. Installation of the seat is the reverse of the removal
procedure.
CAUTION: Do not over tighten fasteners securing side panel to
front panel and frame.
Zero Owner's Manual (FX and FXS).book Page 24 Thursday, May 13, 2021 10:53 AM