Zero Motorcycles FX 2022, Owner'S Manual

Page: 104 / 164

General Maintenance
6.32
Cleaning
CAUTION: Improper cleaning can damage electrical
components, cowlings, panels, and other plastic parts. Do not
use high pressure water or steam cleaners; they can cause water
intrusion of bearing, seals, and electrical components. Avoid
spraying water of great force around the dash unit, quick charge
connector, power pack, or controller.
To prolong the life of your motorcycle it should be washed
periodically. Regular cleaning is an important factor in
maintaining the value of your motorcycle. It also ensures that
safety related parts remain in full working order.
If tar, bugs, or other similar deposits have accumulated, clean
them off as soon as possible.
WARNING! After cleaning and before starting your journey,
always test the brakes.
Washing
CAUTION: Do not use any harsh chemical products on plastic
parts. Be sure to avoid using cloths or sponges which have been
in contact with strong abrasive cleaning products, solvent or
thinner, fuel (gasoline), rust removers or inhibitors, brake fluid,
antifreeze, or electrolyte.
Note: We recommend the use of a garden hose to wash your
motorcycle. High-pressure washers (like those at coin-operated
car washes) can damage certain parts.
1. Gently wash your motorcycle with a sponge or a clean soft
cloth, mild detergent, and plenty of water.
2. Use care when cleaning the plastic parts (dash, fenders, and
side panels), which can scratch easier than the other parts of
your motorcycle.
3. After washing, rinse your motorcycle thoroughly with plenty
of clean water to remove any detergent residue.
4. Dry your motorcycle with a chamois or a soft, dry towel.
5. After cleaning, inspect for damage, wear or leaks.
After washing the motorcycle, allow all of the electrical
components to dry prior to operation. If the motorcycle is ridden
after being washed, apply both brakes several times in order to
remove any moisture from the brake pads.
Wheels and Tires
Avoid using strong acidic wheel cleaners, especially on spoked
wheels. If such products are used on hard-to-remove dirt, do not
leave the cleaner on the affected area any longer than instructed.
Also thoroughly rinse the area off with water, immediately dry it,
and then apply a corrosion protection spray.
Do not use products such as tire dressings on tires as this will
deteriorate traction.
Zero Owner's Manual (FX and FXS).book Page 32 Thursday, May 13, 2021 10:53 AM