Zero Motorcycles FX 2022, Owner'S Manual

Page: 102 / 164

General Maintenance
6.30
Turn Signal Light Bulb Replacement
1. Remove the turn signal lens screw (A) and remove the lens.
2. Push in on the bulb, turn the bulb counterclockwise, and
then pull the bulb out.
3. Insert the new bulb into the socket, push in and turn
clockwise until it stops.
4. Install the lens and screw; tighten the screw. Do not
over-tighten the screw.
Brake/Tail Light Bulb Replacement
To replace the brake/trail light bulb:
1. Remove the brake/tail light lens screws (A) and remove the
lens.
2. Push in on the bulb and turn the bulb counter-clockwise then
pull the bulb out.
3. Insert the new bulb into the socket, push in and turn
clockwise until it stops.
4. Install the brake/tail light lens and screws; tighten the
screws. Do not over-tighten the screws.
Zero Owner's Manual (FX and FXS).book Page 30 Thursday, May 13, 2021 10:53 AM