AqueenaPro WT-100
Installation and Repair manual
Rev. A
Installation and Repair Manual AqueenaPro WT-100
Page 25 of 64
Note:
Checks if the sealing was not loosen and if it is correctly mounted, before the RO housing is closed. The
sealing must be put on therear od the shell.
6. Close the unit.
Note:
Verify all connections before the top cover is put back – no water leakage.
Insert RO membrane with O-ring
inside of the housing
The RO membrane should be
possible to insert without any force.
Close the housing by using wrench,
plug the tube in to quick connector and
secure with the clip.
