AqueenaPro WT-100
Installation and Repair manual
Rev. A
Installation and Repair Manual AqueenaPro WT-100
Page 29 of 64
5. Replace the filter – Pay attention to correct water flow - the arrow on the filter label represents correct
water flow.
6. Plug the tube to quick connector and secure it with locking clip.
If the pellet carbon filter WT-100-73 and/or PP filter 1 m WT-100-74 needs to be replaced, unplug the PP filter
m WT-100-72 firstly and remove all three filters (WT-100-72, WT-100-73 and WT-100-74) as one set.
Change requested filter(s), connect tubes in to quick connectors and assemble set back on its position.
Connect tubes to PP filter 5 m WT-100-72.
Disconnect PP filter 5 m WT-100-72
3 filters set
