Installation
33
www.zepro.com
7.1.9
VW Crafter (Art. no. 76745TL)
FWD 2017-
1 Dismantle the spare wheel and
associated mounts and ladder. Any
towing hook must also be removed.
2 Install the chassis bracket in the ve-
hicle chassis, use excisting holes.
Use four M12x110 screws and one
reinforcement plate, see Fig 28.
Tightening torque 80 Nm
It may be necessary to create a
cut-out in the bumper.
NOTE
3 Drill up the holes on the vehicle
chassis inside to Ø15 mm, so that
the spacer tubes fits in. Use 2
M10x90, nut, washer and spacer..
Tightening torque 50 Nm.
4 Install the lift, see "7.2 Installing the
5 Install the platform, see "7.3 Instal-
ling the Platform" on page 51.
Fig 28. Installing the chassis bracket
Fig 29. Mounted chassis bracket
Summary of Contents for ZHZ 500-850
Page 2: ......
