Radiant BH15ST Installation, Operation & Service Manual Download | Manualshive

Page: 1 / 82

background image

WARNING

FOR YOUR SAFETY

If you smell gas:

1.  Open windows.
  2.  DO NOT try to light any appliance.
  3.  DO NOT use electrical switches.
  4.  DO NOT use any telephone in
   your building.
  5.  Extinguish any open flame.
  6.  Leave the building.
  7.  Immediately call your local gas

supplier after leaving the building.

Follow the gas supplier’s

   instructions.
  8.  If you cannot reach your gas

supplier, call the Fire Department.

Fire Hazard

Keep all flammable objects, liquids and
vapors the minimum required clear-
ances to combustibles away from
heater.

Some objects will catch fire or explode
when placed close to heater.

Failure to follow these instructions can
result in death, injury or property
damage.

WARNING

Installation must be done by a registered installer/
contractor qualified in the installation and service
of gas-fired heating equipment or your gas supplier.

Improper installation, adjustment, alteration, service
or maintenance can result in death, injury or
property damage. Read the installation, operation
and service manual thoroughly before installing or
servicing this equipment.

Installer

Please take the time to read and understand

these instructions prior to any installation.

Installer must give a copy of this manual to the owner.

Owner

Keep this manual in a safe place in order to provide

your serviceman with necessary information.

© 2009 Radiant Ser

v

ices Ltd.

Radiant Services Limited

Unit A, Kings Hill Business Park
Darlaston Road, Wednesbury
West Midlands WS10 7SH UK
Telephone: +44 (0)121 556 4495
Fax: +44 (0)121 556 8142

www.radiantservices.co.uk

Radiant Services

™

BH

Vacuum Assisted

Linear, Double Linear,

U-Tube, and Multi-Burner

Gas Fired Heating Systems

Installation, Operation &

Service Manual

BH15UT
BH20UT
BH25UT/EF
BH30UT/EF
BH35UT/EF
BH40UT/EF
BH45UT/EF

BH50UT/EF
BH15ST
BH20ST
BH25ST/EF
BH30ST/EF
BH35ST/EF
BH40ST/EF

BH45ST/EF
BH50ST/EF
BH55ST
BH30DL
BH40DL
BH50DL/EF
BH60DL/EF

RS170101UK Re

v

. A 11/09

1
2
3
...
»

Summary of Contents for BH15ST



















































































Reviews:

No comments

Related manuals for BH15ST

Brand: Olympia Pages: 5

Brand: Xilica Audio Design Pages: 10

Brand: Cal-Royal Pages: 40

Brand: Paradox Pages: 72

Brand: TaoTronics Pages: 15

Brand: AI-Sonic Pages: 8

Brand: PYLE Audio Pages: 4

Brand: Sandstrom Pages: 32

Brand: Gladen Pages: 2

Brand: Teac Pages: 60

Brand: Karma Pages: 12

Brand: Nakamichi Pages: 32

Brand: Safety Technology International Pages: 4

Brand: UltraSecure Pages: 2

Brand: Sanela Pages: 4

Brand: ALFIN Pages: 16

Brand: Onkyo Pages: 68

Brand: TrailKeg Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands