Z 2500-130/150
68
Marking and decals
www.zepro.com
Image 81. Load diagram
Image 82. Identification plate
Image 83. Work area
14.2
Load diagram
Load diagram decals are positioned close to control
devices at a clearly visible, suitable location on the
platform. The decal clearly shows the nominal load
and a load diagram describing the maximum permitted
load at various places on the platform.
14.4
Work area
A “work area” decal must be attached to the platform
so that any drivers parking behind the vehicle know
that 5 m clearance is needed for the platform to open
and that sufficient space should be left for loading and
unloading.
14.3
Identification plate
The identification plate is fitted to the frame of the tail
lift and contains the following information:
Type of lift
Max permitted load in kg
Production number
Year of manufacture
Address and tel. no. of manufacturer
Country of manufacture
EC / ECE type number of approved underrun protection
Corresponding identification plate in decal design,
preferably placed on the cabin door upright for reliable
identification.
Summary of Contents for Z 2500-130 Series
Page 2: ......
Page 77: ...Z 2500 130 150 Specifications 77 www zepro com Image 92 Loading diagram 18 4 Loading diagram ...
Page 79: ......
