Zennio KNX-IP Router / Interface PLess
http://www.zennio.com
Technical Support:
http://support.zennio.com
31
Figure 22
KNX line (TP) configuration tab.
The following parameters are specific for the line (they are not available for the main
line):
Physical Addresses: Repetition if Errors on Line
: sets the desired reaction
upon transmission errors in the line (e.g.: busy receiver, acknowledgement
not received, negative acknowledgement, etc.) of telegrams destined to
physical addresses. The options are:
➢
No
: the undelivered telegram will not be re-sent.
➢
Normal
: the undelivered telegram will be re-sent up to three times.
➢
Reduced
: the undelivered telegram will be re-sent once.
Group Addresses: Repetition if Errors on Line
[
No/
Normal
/Reducida
]: sets
the desired reaction upon transmission errors in the line (e.g.: busy receiver,
acknowledgement not received, negative acknowledgement, etc.) of
telegrams destined to a group address.
Telegram Confirmations on Line
: sets when the device should confirm (by
sending an immediate ACK message or IACK) the reception of telegrams.
➢
If Routed
: will make the device respond with an IACK message only if the
received telegram is routed towards the mainline,
➢
Always
: will make the device send a confirmation for every telegram it
receives, even if not routed to the line on the other side.
