Zennio KNX-IP Router / Interface PLess
http://www.zennio.com
Technical Support:
http://support.zennio.com
13
2.4
LED INDICATORS
Zennio KNX-IP Router / Interface PLess incorporates seven LED lights on the top of
the device that make it easy to monitor the status of the buses and to detect typical
communication problems, as detailed next.
Figure 7
LEDs
Main Line (IP) Status LED
: shows the status of the primary bus.
➢
OFF: error or mainline not connected or not powered.
➢
ON (green) = Ethernet connection OK.
➢
ON (orange) = manual function in execution or factory reset preparation.
Note
:
the LED colours are independent. It must be taken into account that
when the green and red colours are on at the same time, the result colour is
orange.
The update of the LED status can be delayed a few seconds after the trigger
event, e.g., after the disconnection of the main line.
KNX Line Status LED
: shows the status of the secondary bus.
➢
OFF: error or secondary line not connected.
➢
ON (green): TP connection OK
➢
BLINKING (green): boot mode (see section 2.6.3).
