Zennio KNX-IP Router / Interface PLess
http://www.zennio.com
Technical Support:
http://support.zennio.com
26
3.1
GENERAL
When entering the parameter edition of Zennio KNX-IP Router / Interface PLess for the
first time, a window similar to Figure 18 will be shown.
Figure 18
General tab.
As shown in Figure 18, this screen contains the following parameters:
Host Name
: string of up to 30 characters to easily identify the device in ETS
or from a KNXnet/IP system.
Slow Tunneling Connections
(only in
Zennio KNX-IP Router PLess
)
[
Enable/
Disable
]
1
: allows slow connections between ETS and the device.
Manual Function
(only in
Zennio KNX-IP Router PLess
): sets the desired
function to be executed by the device while in the manual mode. The
available values are:
➢
Disabled
: no action.
➢
Transmit All Telegrams
: the device will not filter/drop any telegram
transferred from one line the other.
➢
Transmit Physical Addr. Telegrams
: the device will not filter/drop physical
addresses; in other words, all telegrams destined to physical addresses
will be transmitted while in manual mode; on the other hand, group
telegram filtering will stay the same as in normal mode.
➢
Transmit Group Addr. Telegrams
: the device will not filter/drop group
addresses; in other words, the group address filter table will stay
disabled
1
The default values of each parameter will be highlighted in blue in this document, as follows:
[
default
/rest of options
].
