Z35
http://www.zennio.com
Tecnical Support:
http://support.zennio.com
59
Figure 51.
2-Button Control: Multimedia.
Action
[
Left = Stop/Backward; Right = Start/Forward
/ Left = Start/Forward; Right
= Stop/Backward
]
:
sets which of the two buttons will send the Stop/Backward
orders and which one the Start/Forward orders.
The orders will be
sent to the bus through the object “
[Pn] [Bi] 1-bit Multimedia
Control
”, while the indicator values should be received through the object “
[Pn] [Bi]
Multimedia Text Indicator
”.
3.3.2.4
CLIMATE CONTROL
This category covers a set of functions related to the climate control. The available
options for
Function (
and for the dependent parameters) are detailed in the following
sections.
3.3.2.4.1
[Climate] Temperature Setpoint
This function permits
controlling the temperature setpoint of an external thermostat
by means of a two-button box and of the parameters enabled to that effect. When any
box is configured as this control type, a single object will appear:
"[Pn][Bi] (Climate)
Temperature Setpoint"
.
In addition, the box itself will permanently reflect the value in ºC (o ºF) of the status object,
whose value gets automatically updated after sending control orders (that is, after
pressing the buttons), being even possible to receive values from the bus, for example,
from the corresponding setpoint status object from the external thermostat.
Therefore, after every press on the temperature increment button, the bus will be sent
(through the control object) a certain value, progressively increased on every button
press until the parameterisable maximum setpoint value has been reached. Analogously,
after every press on the temperature decrement button, the bus will be sent a
progressively decreased value until the parameterisable minimum setpoint value has
been reached.