Z35
http://www.zennio.com
Tecnical Support:
http://support.zennio.com
14
Button Box Style
[
No frame
/ Colored frame / Black frame
]: permits selecting a
frame for the buttons of controls and pages, in order to distinguish them from the
indicators.
Figure 4.
Button box (black, white color, no box).
Global Color Mask
[
White
/ Color select by dropdown
]: permits selecting the
color that will be applied to all the elements of the screen in a general way.
Note
:
It is possible to set a different color in the desired boxes and buttons by
using a specific parameter in their configuration tab (see section 3.3.2)
.
First Weekday
[
Monday
/ Sunday
]: sets the first day of week on calendar.
Weekdays initials
[
MTWTFSS
]: permits customising the label that will represent
each of the weekdays on the screen. A seven-character string (including letters
or numbers), ordered according to the above First Weekday parameter, must be
entered
– each of the characters will represent one weekday.
Hour Update Request Delay
[
disabled
/enabled
]: sets a sending
delay
[
1
…65535
] [
s/
min
/h
] for the date/time request when the device starts up.
Update Objects
[
Disabled
/After Programming/After Reset/After Programming
and Reset
]: enables the sending of read requests to update status objects and
indicators (see section 2 for further details). There are four options available,
some of them with a configurable
delay
:
“Disabled”: no read request, therefore objects are not updated.
“After Programming”: read requests are sent after a complete or partial
download (or when pressing the reset button in the configuration page, if set
as “Parameters Reset”, see section 3.4), after the parameterised
delay
([
0…
10
…65535
] [
s
/min/h
]).
“After Reset”: read request are sent when a reset occurs (bus failure, the
Reset Device ETS option or when pressing the reset button in the
configuration page, if set as “Z35 Reboot”, see section 3.4), after the
parameterised
delay
([
0…
10
…65535
] [
s
/min/h
]).