Z35
http://www.zennio.com
Tecnical Support:
http://support.zennio.com
57
Figure 49.
2-Button Control: Shutter.
Action
[
Left = Downwards; Right = Upwards
/ Right = Upwards; Left =
Downwards
] sets which of the two buttons will send the move up orders and
which the move down orders.
Type parameter
:
[
Standard
]: a long press will make the device send to the KNX bus an order
to start moving the shutter (upwards or downwards, depending on the
button), while a short press will make it send a stop order.
[
Hold & Release
]: as soon as the button is held, the device will send the
KNX bus an order to start moving the shutter (upwards or downwards,
depending on the button). Once the button is released, it will send an order
to stop the shutter.
3.3.2.3.7
Dimmer
The light control function permits making use of the two buttons in the box to send orders
to a light dimmer, either through a binary object or through a 4-bit object. Moreover, the
box will permanently display the current value of the dimming status object, which needs
to be linked to the analogous object from the dimmer (as it does not get automatically
updated on button presses).
Figure 50.
2-Button Control: Dimmer.