Z35
http://www.zennio.com
Tecnical Support:
http://support.zennio.com
11
2
UPDATE OBJECTS AFTER RESET
The aim of this functionality is allowing the integrator to make a read request to the
statuses of the device objects after a reset. There are two situations in which this
functionality may be useful:
In case of a Z35 reset, if there have been changes in the bus while the Z35 was
off, after the reset, the objects in Z35 keep the same value as before the reset,
but not their actual value in the installation.
In addition, after programming from ETS, all objects are initialized to their default
values, but not to their actual values in the installation.
When a bus failure or ETS programming occurs, read requests of all the following objects
will be sent gradually (to prevent bus overload):
General objects
: date and time, scene (reception), disabling pushbuttons,
cleaning function, external temperature, backlight mode, brightness, pulse sound
enable and temperature scale.
Indicator objects
.
Timer
enabling objects.
Alarm confirmation
object.
Ventilation control:
Auto mode dedicated object.
14-byte Text indicator
.
RGB and RGBW
objects.
Objects that will NOT be updated are:
Control objects
.
Alarm trigger
.
4-Bit
Light Dimming
.
4-Bit
RGB/RGBW Dimming
.
Shutter: Stop/Step
.
The time and date objects of Z35 will be read from the bus always after a reset,
regardless of whether this functionality is active or not.