Zennio TMD, User Manual, Page: 83 / 88

TMD-Display View
http://www.zennio.com Technical Support: http://support.zennio.com
83
1 Bit I/O C T R W - DPT_Switch 0/1 [Pn] [X2] Two Objects - Long Press: "1" 1-bit Generic Control
1 Bit I/O C T R W - DPT_Switch 0/1 [Pn] [X2] Two Objects - Long Press: "0/1" 1-bit Generic Control
1 Byte I/O C T R W - DPT_Value_1_Ucount 0 - 255 [Pn] [X2] Enumeration Rotating value change
1 Byte I/O C T R W - DPT_Value_1_Ucount 0 - 255
[Pn] [X2] Two Objects - Long Press: (1-
byte)
Send selected 1-byte value on long
press
29, 42, 55, 68,
81, 94, 107, 120
133, 146, 159,
172, 185, 198,
211, 224
1 Bit I C - - W - DPT_Switch 0/1 [Pn] [X2] LED On/Off 0 = On; 1 = Off
1 Bit I C - - W - DPT_Switch 0/1 [Pn] [X2] LED On/Off 0 = Off; 1 = On
225 1 Byte I C - - W - DPT_SceneControl 0-63; 128-191 [Thermostat] Scene Input Scene Value
226 2 Bytes I C - - W - DPT_Value_Temp -273.00 - 670760.00 [T1] Temperature Source 1 External Sensor Temperature
227 2 Bytes I C - - W - DPT_Value_Temp -273.00 - 670760.00 [T1] Temperature Source 2 External Sensor Temperature
228 2 Bytes O C T R - - DPT_Value_Temp -273.00 - 670760.00 [T1] Effective Temperature Effective Control Temperature
229 1 Byte I C - - W - DPT_HVACMode
1=Comfort
2=Standby
3=Economy
4=Building Protection
[T1] Special Mode 1-byte HVAC Mode
230
1 Bit I C - - W - DPT_Ack 0/1 [T1] Special Mode: Comfort 0 = Nothing; 1 = Trigger
1 Bit I C - - W - DPT_Switch 0/1 [T1] Special Mode: Comfort 0 = Off; 1 = On
231
1 Bit I C - - W - DPT_Ack 0/1 [T1] Special Mode: Standby 0 = Nothing; 1 = Trigger
1 Bit I C - - W - DPT_Switch 0/1 [T1] Special Mode: Standby 0 = Off; 1 = On
232
1 Bit I C - - W - DPT_Ack 0/1 [T1] Special Mode: Economy 0 = Nothing; 1 = Trigger
1 Bit I C - - W - DPT_Switch 0/1 [T1] Special Mode: Economy 0 = Off; 1 = On
233
1 Bit I C - - W - DPT_Ack 0/1 [T1] Special Mode: Protection 0 = Nothing; 1 = Trigger
1 Bit I C - - W - DPT_Switch 0/1 [T1] Special Mode: Protection 0 = Off; 1 = On
234 1 Bit I C - - W - DPT_Window_Door 0/1 [T1] Window Status (Input) 0 = Closed; 1 = Open
235 1 Bit I C - - W - DPT_Ack 0/1 [T1] Comfort Prolongation 0 = Nothing; 1 = Timed Comfort
236 1 Byte O C T R - - DPT_HVACMode
1=Comfort
2=Standby
3=Economy
4=Building Protection
[T1] Special Mode Status 1-byte HVAC Mode
237
2 Bytes I C - - W - DPT_Value_Temp -273.00 - 670760.00 [T1] Setpoint Thermostat Setpoint Input
2 Bytes I C - - W - DPT_Value_Temp -273.00 - 670760.00 [T1] Basic Setpoint Reference Setpoint
238 1 Bit I C - - W - DPT_Step 0/1 [T1] Setpoint Step 0 = -0.5ºC; 1 = +0.5ºC
239 2 Bytes I C - - W - DPT_Value_Tempd
-670760.00 -
670760.00
[T1] Setpoint Offset Float Offset Value
240 2 Bytes O C T R - - DPT_Value_Temp -273.00 - 670760.00 [T1] Setpoint Status Current Setpoint
241 2 Bytes O C T R - - DPT_Value_Temp -273.00 - 670760.00 [T1] Basic Setpoint Status Current Basic Setpoint
242 2 Bytes O C T R - - DPT_Value_Tempd
-670760.00 -
670760.00
[T1] Setpoint Offset Status Current Setpoint Offset
243
1 Bit I C - - W - DPT_Reset 0/1 [T1] Setpoint Reset Reset Setpoint to Default
1 Bit I C - - W - DPT_Reset 0/1 [T1] Offset Reset Reset offset