TMD-Display View
TMD-Display View
http://www.zennio.com
Technical Support:
http://support.zennio.com
13
Hide explanation texts
: displays or hides the explanation texts on the top of
the parameter screen of some functions. Experienced users may prefer to
hide these texts to have simpler parameter screens.
The project topology shows the following objects by default:
[General] Time of day
: object for updating the time shown on the display.
Important
:
the time of day must be set through the bus by means of an
external reference. Note that in the absence of power, the clock will get
outdated
.
[General] Scene: Receive
and
[General] Scene: Send
: objects for
respectively receiving and sending scene values from/to the KNX bus
whenever it is necessary (e.g., when the user touches a button that has been
configured to send scene commands; see section 2.4.3 and section 2.4.4).
2.2.2
TEMPERATURE SENSOR
TMD-Display View is equipped with
one internal temperature probe
which can
monitor the ambient temperature of the room, thus making the device capable of
reporting it to the KNX bus and of triggering certain actions when the temperature
reaches specific values.
Please refer to the specific manual “
Temperature Sensor
” (available in the TMD-
Display View section at the Zennio homepage,
www.zennio.com
) for detailed
information about the functionality and the configuration of the related parameters.
2.2.3
SCREENSAVER
The screensaver is a special page that will only be shown after a period of inactivity,
configurable by parameter.
It is possible to configure the screensaver to only show the current
Time
, the current
Temperature
(selecting the desired measurement source: the internal temperature
sensor or an external value) or
both
(alternating every five seconds).
Notes
:
The temperature shown will be truncated to the range [-99ºC, 199ºC].