TMD-Display View
TMD-Display View
http://www.zennio.com
Technical Support:
http://support.zennio.com
43
Enumeration
Figure 28
Pair Buttons
– Enumeration.
# Enums
: number of states (up to 6) that will be distinguished. For every
distinguished state, one parameter named
Value
j
will become available, in
order to set the value sent through the communication object.
Value
j
: numerical value (0
– 255) that will be sent through the control object
when the user, after pressing the buttons, sets the control to state
j
. The
actual sending will not be performed until 1.5 seconds after the last press.
Text
j
: text to be displayed between the icons of the buttons, to indicate the
current enumeration value.
LED illumination control
: analogous to the homonymous parameter for the
previous functions (see above). In this case, the only options are “Regular”
and “Dedicated Object”.
The values will be
sent to the bus through object “
[Pn] [X] Enumeration
”.
Shutter
The move orders will be sent through “
[Pn] [X] Move Shutter
”, while the stop orders
will be sent through “
[Pn] [X] Stop Shutter/Step
” (for Standard type) or “
[Pn] [X] Stop
Shutter
” (for Hold & Release type).
The parameters for this function are: