Zennio TMD, User Manual, Page: 36 / 88

TMD-Display View TMD-Display View
http://www.zennio.com Technical Support: http://support.zennio.com
36
Indicator
Figure 22 Pair buttons
– Indicator.
Action : assigns each
of the two buttons the value to be sent through “
[Pn]
[X] Switch
” (which has the Write flag enabled, so the state of the switch can
be updated from external devices). The options are “Left=0; Right=1” and
“Left=1; Right=0”.
Note : this parameter will remai
n hidden unless having selected “Every button
pair is configured separately
” in
Action of the pair buttons (see section
2.3.1).
Indicator Type : sets the type and size of the object that receives the value of
the indicator to be shown on the display. The options are:
 “Counter”: the value is received through the communication object “
[Pn]
[X] 1-byte / 2-byte / 4-byte Signed / Unsigned Int Indicator
”. After
selecting Counter, the following parameters appear:

Size :
sets the size of the object, “1 byte”, “2 bytes” or “4 bytes Signed
Int
”

Signed : checkbox to set if the values will be signed or unsigned.

Units : text that will be displayed next to the indicator to identify the units
of the value. Up to 4 characters are available.