MAXinBOX Hospitality
Technical Support:
7
1.4
STATUS INDICATORS
Each of the outputs of MAXinBOX Hospitality incorporates a light indicator that reflects
its current state.
1.4.1
BINARY AND SHUTTER OUTPUTS
If an output is configured as binary, the LED indicator will only be on while the relay
remains closed; otherwise it remain off.
If configured as a shutter channel, the LED indicator will only remain on while the
shutter is in motion.
Please refer to section 2.3 for details about the relay outputs.
1.4.2
FAN COIL CONTROL OUTPUTS (VALVE / FAN)
Regarding the
valve control outputs
, the LED indicator of each output will behave
analogously as the LEDs of the binary outputs: it will remain off while the
corresponding valve is closed and on while the corresponding valve is open.
Regarding the
fan control outputs
, the two LED indicators provide information about
the current fan speed level:
Fan switched off: both LEDs off.
Fan at speed level 1: both LEDs blinking every 1 second.
Fan at speed level 2: both LEDs blinking every 0.5 seconds.
Fan at speed level 3: both LEDs steadily on.
In case
less than three different speed levels
have been parameterised, the LEDs
will stay steadily on while the fan is at the maximum level (e.g., level 2), and as
described above for the lower levels (e.g., levels 1 and off).
Please refer to section 2.4 for details about the fan coil control outputs.
