MAXinBOX Hospitality
Technical Support:
12
2.3
OUTPUTS
MAXinBOX Hospitality incorporates two relay outputs, which can be configured in
parameters as individual
binary outputs
to control up to two different loads, or as a
joint
shutter channel
to control shutters and blinds, with or without slats.
Moreover, in case the fan coil module remains disabled (see section 2.4) or is
configured to control a two-pipe fan coil unit consisting of a sole on-off valve, it is
possible to configure one of the two valve control relay outputs (V2) as
a third multi-
purpose binary output
, although not valid to control capacitive loads.
PARAMETERISATION
When the Outputs function has been activated in the
“General” parameter screen, the
“
Outputs
” section will be available in the tree on the left, containing itself a tab named
“
Configuration
”.
Figure 4
Outputs - Configuration
Channel A can be configured through the drop-down list as two independent
binary
outputs
or as a
shutter channel
(which makes use of both relays).
Binary output V2
will also be available for configuration once the Fancoil function has been disabled.
According to the above configuration, new entries will be incorporated into the tab tree.
For detailed information about the functionality and the configuration of the related
parameters, please refer to the following specific manuals, available in the MAXinBOX
Hospitality product section at the Zennio homepage (
Individual outputs
.
Shutter channels
.
