MAXinBOX Hospitality
Technical Support:
4
1
INTRODUCTION
1.1
MAXINBOX HOSPITALITY
MAXinBOX Hospitality from Zennio is a versatile KNX multi-function actuator destined
to cover the climate control needs in KNX environments with integrated
fan coil units
where both the fan speed and the opening of the water pipe valves are controlled by
relays.
At a glance, the most outstanding features of MAXinBOX Hospitality are:
2 multi-purpose relay outputs
, configurable as:
Up to two binary outputs.
Up to one shutter channel.
Note
:
if a four-pipe fan coil with a three-point valve is configured, these two
outputs are used to control the valve
.
2 relay outputs to control one three-point valve or up to two on-off
valves
. One of these outputs can also be configured as an additional
multi-
purpose relay output
(in this case, for non-capacitive loads) in case it is not
necessary for the fan coil control.
3 relay outputs to control up to three fan levels.
6 multi-purpose inputs
, each of them configurable as:
Temperature probe,
Binary input (i.e., pushbuttons, switches, sensors),
Motion detector.
10 customisable, multi-operation logic functions
.
Master light control
for an easy, out-of-the-box control of a set of luminaires
(or functionally equivalent devices)
one of which acts as a general lamp and
the others as secondary lamps.
Manual operation / supervision
of the relay outputs through the on-board
pushbuttons and LEDs.
Heartbeat
or periodical “still-alive” notification.
