Zennio MAXinBOX Hospitality ZCL-HP126, User Manual

Page: 27 / 32

MAXinBOX Hospitality
http://www.zennio.com Technical Support: http://support.zennio.com
27
80, 109, 138, 167, 196,
225
1 Bit I C - - W - DPT_Ack 0/1 [Ix] External Motion Detection
0 = Nothing; 1 = Motion detected by an
external sensor
81, 86, 91, 110, 115,
120, 139, 144, 149, 168,
173, 178, 197, 202, 207,
226, 231, 236
1 Byte O C T R - - DPT_Scaling 0% - 100% [Ix] [Cx] Detection State (Scaling) 0-100%
82, 87, 92, 111, 116,
121, 140, 145, 150, 169,
174, 179, 198, 203, 208,
227, 232, 237
1 Byte O C T R - - DPT_HVACMode
1=Comfort
2=Standby
3=Economy
4=Building Protection
[Ix] [Cx] Detection State (HVAC)
Auto, Comfort, Standby, Economy, Building
Protection
83, 88, 93, 112, 117,
122, 141, 146, 151, 170,
175, 180, 199, 204, 209,
228, 233, 238
1 Bit O C T R - - DPT_Switch 0/1 [Ix] [Cx] Detection State (Binary) Binary Value
84, 89, 94, 113, 118,
123, 142, 147, 152, 171,
176, 181, 200, 205, 210,
229, 234, 239
1 Bit I C - - W - DPT_Enable 0/1 [Ix] [Cx] Enable Channel According to parameters
85, 90, 95, 114, 119,
124, 143, 148, 153, 172,
177, 182, 201, 206, 211,
230, 235, 240
1 Bit I C - - W - DPT_Switch 0/1 [Ix] [Cx] Force State 0 = No Detection; 1 = Detection
241, 252, 263 1 Byte I C - - W - DPT_SceneControl 0-63; 128-191 [Ox] Scenes
0 – 63 (Execute 1 – 64); 128 – 191 (Save 1 –
64)
242, 253, 264
1 Bit I C - - W - DPT_BinaryValue 0/1 [Ox] On/Off N.O. (0=Open Relay; 1=Close Relay)
1 Bit I C - - W - DPT_BinaryValue 0/1 [Ox] On/Off N.C. (0=Close Relay; 1= Open Relay)
243, 254, 265 1 Bit O C T R - - DPT_BinaryValue 0/1 [Ox] On/Off (Status) 0=Output Off; 1=Output On
244, 255, 266 1 Bit I C - - W - DPT_Enable 0/1 [Ox] Lock 0=Unlock; 1=Lock
245, 256, 267 1 Bit I C - - W - DPT_Start 0/1 [Ox] Timer 0=Switch Off; 1=Switch On
246, 257, 268 1 Bit I C - - W - DPT_Start 0/1 [Ox] Flashing 0=Stop; 1=Start
247, 258, 269
1 Bit I C - - W - DPT_Alarm 0/1 [Ox] Alarm 0=Normal; 1=Alarm
1 Bit I C - - W - DPT_Alarm 0/1 [Ox] Alarm 0=Alarm; 1=Normal
248, 259, 270 1 Bit I C - - W - DPT_Ack 0/1 [Ox] Unfreeze Alarm Alarm=0 + Unfreeze=1 => End Alarm
249, 260, 271 1 Bit O C T R - - DPT_State 0/1 [Ox] Warning Time (Status) 0=Normal; 1=Warning
250, 261, 272
4
Bytes
I/O C T R W - DPT_LongDeltaTimeSec
-2147483648,
2147483647
[Ox] Operating Time (s) Time in Seconds
251, 262, 273
2
Bytes
I/O C T R W - DPT_TimePeriodHrs 0 - 65535 [Ox] Operating Time (h) Time in Hours
274 1 Byte I C - - W - DPT_SceneControl 0-63; 128-191 [Shutter] Scenes
0 - 63 (Execute 1 - 64); 128 - 191 (Save 1 -
64)
275 1 Bit I C - - W - DPT_UpDown 0/1 [Cx] Move 0=Raise; 1=Lower