KLIC-MITT v2
Technical Support:
21
Four positions
:
Control Values
Status Value
Position Sent to the Unit
1-25%
25%
Position 1
26-50%
50%
Position 2
51-75%
75%
Position 3
76-100%
100%
Position 4
Table 5.
Flap position (four positions)
Five positions
:
Control Values
Status Value
Position Sent to the Unit
1-20%
20%
Position 1
21-40%
40%
Position 2
41-60%
60%
Position 3
61-80%
80%
Position 4
81-100%
100%
Position 5
Table 6.
Flap position (five positions)
Swing Available
[
disabled
/enabled
]: sets whether the A/C unit incorporates a
Swing function. If enabled, value “0%” of the "
[AC]
Flaps: Percentage Control
"
and "
[AC]
Flaps: Percentage Control (Status)
" objects will be reserved for
triggering such function and reporting whether it is currently active, respectively.
Moreover, two more parameters will show:
Individual Object for Swing
[
disabled
/enabled
]
: enables the “
[AC] Flaps:
Swing
” and “
[AC] Flaps: Swing (Status)
” one-bit objects, which will let
activating/deactivating the swing function or reading its current status,
respectively.
Swing Object On/Off
[
0 = Swing On; 1 = Swing Off /
0 = Swing Off; 1 =
Swing On
]: sets the polarity of the above objects.
Automatic Mode Available
[
disabled
/enabled
]: sets whether the A/C unit
incorporates an automatic flap position control. If enabled, the "
[AC]
Flaps:
Automatic
"
and "
[AC]
Flaps: Automatic (Status)
" binary objects are
incorporated into the project topology to allow activating or deactivating such