KLIC-DD
Technical Support:
14
3.2.3
TEMPERATURE LIMITATION
The air conditioning unit has defined upper and lower temperature limits that cannot be
exceeded. Nevertheless, KLIC-DD offers the possibility of establishing new temperature
limits if they are specified within the A/C unit predefined limits (please, llok up the A/C
unit manual).
Temperature limits can be customized for the three modes that have a temperature
associated: Auto, Cool and Heat.
Figure 7:
Temperature limitation configuration.
For these limits to be taken into account, it will be necessary to explicitly enable the
temperature limitation, by sending the value "1" through the specific communication
object "Temperature Limitation". To control the machine using its predefined temperature
limitations, it is necessary to send the value "0" through the same object.
Once established the new temperature limits for every mode and enabled the
functionality, when a value out of the range is sent from the KNX bus, the value that will
be sent to the A/C unit will be the corresponding temperature limit and this new
temperature will be notified, through the object "Temperature sending".
Note:
When configuring in ETS the temperature limitation, this functionality is
automatically enabled by default and the personalized ranges will control the unit
performance when it switches on.