KES Plus
http://www.zennio.com
Technical Support:
http://support.zennio.com
21
2.2
PHASES
The parameter configuration depends on the system type (single phase or three-
phase). The options available will slightly differ for each case, although are entirely
analogous.
2.2.1
GENERAL CONFIGURATION
On this screen, the basic configuration common to all KES Plus phases can be
selected.
ETS PARAMETERISATION
The general Configuration parameters are shown below:
Figure 9
Phases: General configuration
Measurement Units:
➢
Voltage Units
[
mV /
V
]: sets the measurement units of the voltage objects.
➢
Current Units
[
mA /
A
]: sets the measurement units of the current objects.
➢
Power Units
[
W, VAr
/ kW, kVAr
]: sets the measurement units of the
power objects.
➢
Energy Units
[
W·h, VAr·h
/ kW·h, kVAr·h
]: sets the measurement units of
the energy objects.
