KES Plus
http://www.zennio.com
Technical Support:
http://support.zennio.com
35
2.4
NOTIFICATIONS
Notifications in KES Plus consist in sending a binary object to the KNX bus when the
selected variables, stored in either total or partial registers, reach a pre-set value.
The variables on which it is possible to configure notifications are
consumption
,
generation
,
cost
and
CO
2
emissions
, for global magnitudes and 3-phase systems.
In addition, for single phase systems, it is possible to configure
overvoltage
or
low
voltage
notifications in one phase.
ETS PARAMETERISATION
The Notifications tab will become visible once the Notification function has been
enabled in the General screen (see section 2.1).
Figure 22
Notifications
Individual Notification tabs
and the binary objects “
Notification y: __________
” will
become visible once some of 15 notifications has been enabled.
