KES Plus
http://www.zennio.com
Technical Support:
http://support.zennio.com
18
➢
Number of Phases
[
1
/ 2 / 3
]
:
Number of phases of the installation.
Number of Partial Registers
[
0
/ 1 / 2
]
:
Sets the number of partial registers
for each consumption register. When selecting more than zero, the following
objects appear (apart from the registers itself):
➢
“
Reset Partial Register n
”: when receives a “1” all the objects of the
partial register n are set reset (set to zero).
➢
“
Starting Date of Partial Register n
”: reset date of partial register n.
Tariffs
[
enabled/
disabled
]
:
Enables or disables the
“Tariff” tab on the left
menu. See section 2.3 for more details.
Notifications
[
enabled/
disabled
]
:
enables or disables the
“Notification” tab on
the left menu. See section 2.4 for more details.
Alarms
[
enabled/
disabled
]
:
enables o disables the
“Notification” tab on the
left menu. See section 2.5 for more details.
Logic Functions
[
enabled/
disabled
]
:
enables o disables the
“Logic
Functions
” configuration screen on the left menu. See section 2.6 for more
details.
Heartbeat (Periodic Alive Notification)
[
enabled/
disabled
]
:
incorporates a
one-
bit object to the project (“
[Heartbeat] Object
to Send ‘1’
”) that will be
sent periodically with value “1” to notify that the device is still working (
still
alive
).
Figure 8.
Heartbeat (Periodic Alive Notification)
Note: the first sending after download or bus failure takes place with a delay
of up to 255 seconds, to prevent bus overload. The following sendings match
the period set
.
