DALIBOX Broadcast 6CH/4CH
http://www.zennio.com
Soporte técnico:
http://support.zennio.com
16
Custom Initialisation
: see section 2.2.11.
Modes
: see section 2.2.12.
2.2.2
LIMITS
DALIBOX Broadcast 6CH / 4CH allows configuring two different limit types:
Luminosity Limits
: they limit the luminosity ranges controlled by the ballast.
These limits are not perceptible by the user, i.e., the dimming range for the
KNX bus will still be 0-100%, and the dimming time between both ends (0%
to 100%) will be exactly the dimming time parameterised.
Ballast Physical Minimum
: minimum luminosity value that the ballast is
actually able to produce, as specified by the manufacturer. This
determines the actual luminosity level that will correspond to a dimming
percentage of 1%.
Economic Mode
: maximum luminosity level the ballast will be allowed to
reach. It determines the actual luminosity level that will correspond to a
dimming percentage of 100%.
Dimming Limits
: perceptible limits that allow restricting the percentage value
range of the control objects. Note that the actual meaning of the values of
these objects depends itself on the luminosity limits configured. The effect of
these limits over the dimming times is explained in section 2.2.1.
Minimum Dimming Value
: lower dimming percentage allowed. The load
will remain at this level in case of receiving a lower value (only switch-off
orders will be handled).
Maximum Dimming Value
: upper dimming percentage allowed. The load
will remain at this level in case of receiving a greater value.
The dimming curve takes into account all the above limits.
ETS PARAMETERISATION
The tab ‘Limits’ has the following configurable options available:
