Zennio AudioInRoom, Manual

Page: 19 / 26

AudioInRoom
https://www.zennio.com Technical Support: https://support.zennio.com
19
Relative Step [ enabled/ disabled ]: step volume control for each channel
and/or subchannel through the 1-byte object
“
[Audio] Channel X: Volume
Relative Step
” and/or “
[Audio] Channel X, Subchannel Y: Volume
Relative Step
”, depending on whether the channel configuration is stereo or
mono, respectively.
➢
Step Size [ 100% / 50% / 25% / 12.5% / 6.25% / 3.1% / 1.5% ]: value by
which the volume of each channel and/or subchannel will increase or
decrease when sending, respectively, “1” or “0” via the previous objects.
Relative [ enabled/ disabled ]: gradual volume control according to the step
size received by the 4-
bit object “
[Audio] Channel X: Volume Relative
Control
” and/or “
[Audio] Channel X, Subchannel Y: Volume Relative
Control
”.
➢
Speed [ 3
…10
] [ s ]: regulation speed to cover the entire control range
(0%
↔ 100%).
The state object “
[Audio] Channel X: Volume (Status)
” and/or “
[Audio] Channel X,
Subchannel Y: Volume (Status)
” will send the updated volume value each time a
change through any of the above volume controls occurs.
Mute Polarity [0 = Disable Mute; 1 = Enable Mute / 0 = Enable Mute; 1 =
Disable Mute ]: sets the polarity of the object to mute the volume.
Ring Tone [ enabled ]: plays when a "0" or "1" is received through the 1-bit
object “
[Audio] Ring Tone
”
Welcome Tone [ enabled/ disabled ]: plays when a "1" is received through
the 1-
bit object “
[Audio] Welcome Tone
” and stops when a “0” is received.
Figure 9. Welcome Tone.
➢
Number of Repetitions [ 1 , 2 ]: chooses the number of times the tone will
be repeated.