Zennio AudioInRoom, Manual

Page: 22 / 26

AudioInRoom
https://www.zennio.com Technical Support: https://support.zennio.com
22
➢ “
[Audio] Channel X: Alarm (Status)
”:
is sent with value' 1' to warn about
a high temperature in the corresponding channel.
On the other hand, the following communication objects are always available:
“
[Audio] Check-in/Check-out
”: resets the Bluetooth module leaving it ready
for a new user (Check-in) or returning to the default status when a user
leaves (Check-out). See section 1.4.1 for details.
“
[Audio] Check-in/Check-out (Status)
”: will be sent at the end of each
Check-in or Check-out procedure.
“
[Audio][BT] Pairing
”: enables (sending “0” or “1”) the pairing mode and
AudioInRoom remains visible via Bluetooth for approximately 180 seconds.
See section 1.4.2 for details.
“
[Audio][BT] Pairing Mode (Status)
”: indicates the pairing process state. It
is sent at the beginning and end of each pairing process
“
[Audio][BT] Disconnect
”: stops the connection of the devices to the
AudioInRoom. The pairings remain.
“
[Audio][BT] Play/Stop
”: starts (‘1’) or pauses (‘0’) the audio playback. Only
for Bluetooth connection.
“
[Audio][BT] Play/Stop (Status)
”: informs about the audio playback status.
Only for Bluetooth connection.
“
[Audio][BT] Skip
”: plays the next (‘1’) or he previous (‘0’) track. Only for
Bluetooth connection.
“
[Audio] Alarm: Overheating (Status)
” is sent with value' 1' to warn about a
high temperature in the device.
“
[Audio] Unfreeze Alarms
”: unfreezes the alarm.
“
[Audio] Tone
”; 1-bit object that activates (sending “0” or “1”) the ring tone.