AudioInRoom
Technical Support:
9
1.4
BLUETOOTH CONNECTION
AudioInRoom connection with an audio source device through the Bluetooth module is
a simple procedure that maintains connection security at all times when carried out
using a configurable password.
1.4.1
CHECK-IN / CHECK-OUT
The' Check-in' process represents the arrival of a new user to the room and establishes
a new identifier name for the AudioInRoom and a new password or PIN to link to it.
These two values are set by communication object.
Instead, the Check-out process resets the name and password to the default
(parameter) settings. In addition, the list of devices linked to AudioInRoom is deleted,
so that any user who wants to reconnect to AudioInRoom must repeat the pairing
process.
The Check-in or Check-out processes will not be interrupted by the arrival of new
Check-in or Check-out orders. Once finished, the last order received is analysed and, if
it is the opposite than the process just finished, the pertinent actions will be executed.
1.4.2
PAIRING
The pairing process is initiated in AudioInRoom by sending the order via the
corresponding communication object or by pressing (more than three seconds) the test
button.
Once the pairing mode is activated, the AudioInRoom will remain visible via Bluetooth
for approximately 3 minutes
. It can be identified by the name established in the
Check-In process or by the name established by parameter in ETS.
When selecting the desired AudioInRoom to connect to,
the pairing PIN is requested
.
This PIN, again, may be the one established in the Check-in process or the one
established by parameter in ETS.
For serial numbers prior to 20ACC0494 the time it will remain visible will be 1
minute.
