Page 50
Menu Function
Value
Default
Brief Description of Function and Comments
Item
Range
Value
88-I. EN NOISE MUTE
0 / 1
1
When set to 1, the audio signal volume is limited to
a minimum value if no signal is being received from
the broadcaster.
89-I. POKE ENABLE
0 / 1
0
If set to 1, writing to Non - volatile memory
through *M.P.I. is enabled.
90-I. KEY LOCK
0 / 1
0
If set to 1, front keyboard functionality is disabled.
91-I. NOT USED
92-I. NOT USED
93-I. NOT USED
94-I. NOT USED
95-I. AUDIO MD DISP
0 / 1
1
If set to 1, Audio Mode Information is enabled to
appear in the Channel Time Display.
96-I. NOT USED
97-I. NOT USED
98-I. NOT USED
99-I. NOT USED
100-I. ATSC TUNE MD
0 / 1
0
Sets ATSC tuning mode. Set to 0 for virtual channel,
set to 1 for physical channel.
101-I. STRT MINOR CH
0 ~ 255
0
Sets the starting minor channel. For NTSC set to 0.
If not 0, sets minor channel number. Set to 255 to
show last tuned channel at turn On.
102-I. NOT USED
103-I. A RATIO LOCK
0 / 1
0
Set to 1, to retain current aspect ratio at turn Off.
At turn On, last set aspect ratio will be used. Set to 0 to
reset picture aspect ratio to default at TV turn On.
Installer Menu
Installer Menu Items 88-I through 103-I
Detailed Descriptions of Installer
Menu Items
0-I. INSTALLER SEQUENCE
Gives access to Installer Menu depending on the
code selected.
0 = 9876
1 = 4321
2 = 1478
3 = 3698
1-I. POWER MANAGE (Power Management)
Determines hours of no activity before automatic
shutoff. The POWER MANAGE function is for saving
energy. When set to 0, Power Manage is Off.
Settings range from 0 - 7, with 1 - 7 representing
the hours that the TV will remain on, unless there
has been activity from either the control panel or
remote control.
*M.P.I. Multiple Protocol Input: Zenith protocol for
remote control of TV through RJ11 (M.P.I.) jack on
TV connections panel.
2-I. AC ON (AC Power Switchable)
Allows the TV to turn On just by applying AC
power. Pressing the POWER button is not neces-
sary. This is desirable when the TV is plugged into
a cable box or a power outlet controlled by a wall
switch. Use ADJ to select 0 or 1, where 0 is the
default is Off, and 1 is On.
Note:
When set to 1 (On), the TV does not respond
to On/Off commands from either the remote or the
control panel, and the SLEEP TIMER is also not
functional.
3-I. BAND/AFC (Band/Automatic Frequency
Control)
There are 8 possible settings for this option:
0 = Broadcast Fixed
4 = Broadcast AFC
5 = CATV Fixed
1 = CATV AFC
6 = HRC Fixed
2 = HRC AFC
7 = ICC Fixed
3 = ICC AFC
Channels are accessed faster when fixed modes are
used. The AFC (search modes) should only be used
