33
press “SHIFT”.
d. Once all of the numbers are entered, press ENTER until all LED’s
blink 3 times.
2. System Arm/Disarm
a. Press ENTER until LED # 1,2,3,4,5 light up.
b. Enter 4 - 10 digit PIN.
c. Press ENTER until the system arms or disarms.
3. Driver Call
a. Press SHIFT / ENTER 3 times while the system is in armed mode.
x 3
b. All LED’s will blink quickly and 2 siren chirps / light flashes will occur.
Driver call will be sent to the 2-way remote control.
4. Discrete mode
- Hold SHIFT / ENTER for 5 seconds until outer LED’s blink once.
for 5 seconds
- To turn OFF discrete mode, hold down SHIFT / ENTER for 5 seconds
again until outer LED’s blink twice. Discrete mode can be done in
armed or disarmed mode.
WARRANTY CARD
Please go to www.zenesisalarms.com for warranty terms, condi-
tions, warranty details.
