15
2.4 Vehicle Status Press and release
The status of the vehicle will be displayed on the 2-way remote control. The fol-
lowing table describes the different situations. Please note the priority (top to
bottom). If a status condition is met, any other conditions below it will not be
checked. For example, if the remote start condition is displayed, door lock condi-
tion will not be shown.
2.5 Panic (302 A/AS) Press and hold
for 2 sec
If there is a potential threat, you can alert those around you by using this feature.
The siren will sound for 2 minutes and the parking lights will flash. Press either
or
to turn off panic mode. Alternatively, you can use the Z-PASS (if in-
stalled) to turn off the panic mode by entering your PIN code.
2.6 Remote Start Press and hold
for 2 sec
Successful remote start:
Status
Remote Control
Large shock
Alternating BLUE and RED LED flashes 8 times
& beeps 8 times
Warning shock
Alternating BLUE and RED LED flashes 7 times
& beeps 7 times
Hood open
RED LED flashes 6 times & beeps 6 times
Trunk open
RED LED flashes 5 times & beeps 5 times
Door unlocked
BLUE LED flashes normally 2 times & beeps 2
times
Door opened
RED LED flashes fast 4 times & beeps 4 times
Door locked (no triggers)
BLUE LED flashes 1 time & beeps 1 time
Engine ON (with Key)
Alternating BLUE and RED LED flashes normally
3 times & beeps 3 times
Remote Start (with
Remote Control)
Alternating BLUE and RED LED flashes fast 3
times & beeps 3 times
Vehicle
3 parking light flashes &
3 siren chirps
Remote Control
3 RED & BLUE LED
flashes & 3 beeps
