3.3 Remote Control Registration
1. Insert the key into the key cylinder and turn to the ON position (engine is
OFF).
2. Press brake pedal 4 times. On the 4
th
time, hold down the brake pedal.
3. 3 parking light flashes and 3 siren chirps will confirm remote control program-
ming mode. The LED on the antenna module will also be flashing quickly.
4. Press and release
on the remote control to register.
5. After each remote control is added, there will be a confirmation of 2 parking
light flashes and hear 2 siren chirps. On the remote, you will see 2 BLUE
LED flashes and hear 2 beeps. You can add up to 3 2-way remote controls
and 2 1-way remote controls per system.
6. Once the key is turned to the OFF position or 10 seconds have passed with-
out adding a remote control, the system will exit remote control registration
mode. The LED on the antenna module will cease to flash quickly.
NOTE:
Each time a remote control is added, all remote controls must be re-
registered to the system. Adding a remote control erases previously
stored remote controls from the system.
3.4 Remote Start Reservation
Manual transmission vehicles require remote start reservation in order to ensure
that the vehicle is properly prepared for remote start. There are 2 remote start
reservation modes: automatic and manual. Please note that automatic and man-
ual do not refer to the transmission type. Rather, automatic and manual refer to
the type of remote start reservation.
A) Automatic Remote Start Reservation (Default)
1) Before turning off the engine, put the transmission into Neutral. Ensure that
the parking brake (emergency brake) is engaged. Take foot off the brake
pedal.
2) Turn the key to the OFF position. The engine should still be running.
3) Exit the vehicle within 2 minutes.
4) Once the last door is closed, the engine will turn off.
5) Lock (arm) the system. Remote start is ready to be used.
B) Manual Remote Start Reservation
1) Before turning off the engine, put the transmission into Neutral. Ensure that
the parking brake (emergency brake) is engaged. Take foot off the brake
pedal.
2) Press
for 2 seconds.
3) Turn the key to the OFF position. The engine should still be running.
4) Exit the vehicle within 2 minutes.
5) Once the last door is closed, the engine will turn off.
6) Lock (arm) the system. Remote start is ready to be used.
NOTE:
Remote start reservation type can be changed through the User Program-
mable Options.
22
