16
Failed remote start:
•
If
is pressed for 2 seconds while remote start is on, remote start will turn
off. You will see 2 BLUE LED blinks and 2 beeps for confirmation.
•
After the system is disarmed and the door(s) is (are) opened after remote
start, the key must be put into the key cylinder and turned to the ON position
within 2 minutes or the engine will shut off.
•
The default remote start engine running time is 15 minutes. The time can be
changed through the User Programmable Options.
CAUTION:
Do not use the remote start feature if the vehicle is in an enclosed
area. Do not use the remote start feature where laws prohibit its us-
age. Do not turn the key to the Start position or else damage may be
done to the starter motor. Ensure that the parking brake (emergency
brake) is always engaged.
2.7 Trunk Release Press and hold
for 2 sec
Trunk release will unlock the door(s) and disarm (302A / 302AS) the system.
NOTE:
On manual transmission vehicles, trunk release will turn off remote start
reservation.
2.8 Valet Mode
Press and hold Function button for 2 seconds and then press and release Re-
mote Start button
•
Valet mode ON will turn off the alarm feature on 302A and 302AS models.
The siren will not sound.
Reason for Failure
Vehicle
Remote Control
Key in key cylinder at ON
position
5 parking light flashes & 5
siren chirps
5 RED LED flashes & 5
beeps
Open door
6 parking light flashes & 6
siren chirps
6 RED LED flashes & 6
beeps
Open hood and/or trunk 7 parking light flashes & 7
siren chirps
7 RED LED flashes & 7
beeps
Failed remote start
reservation
8 parking light flashes & 8
siren chirps
8 RED LED flashes & 8
beeps
Failed Remote Start
4 parking light flashes & 4
siren chirps
4 RED LED flashes & 4
beeps
Vehicle
2 parking light flashes &
2 siren chirps
Remote Control
2 BLUE LED flashes & 2
beeps
