28
11.
Press and release
.
12.
You will also hear 1 remote control beep to signify the first button in the
sequence.
13.
Press and release
.
14.
You will hear 2 remote control beeps to signify the second button in the
sequence.
15.
Press and release
.
16.
You will hear 3 remote control beeps to signify the third button press.
17.
You will also hear 3 siren chirps and remote control beeps. You will also
see 3 parking light and BLUE LED flashes. Cold or Hot Start Main Setting
is now set to Cold.
18.
Press and release
.
19.
You will also hear 1 remote control beep to signify the first button in the
sequence.
20.
Press and release
.
21.
You will hear 2 remote control beeps to signify the second button in the
sequence.
22.
Press and release
.
23.
You will hear 3 remote control beeps to signify the third button press.
24.
You will also hear 5 siren chirps and remote control beeps. You will also
see 5 parking light and BLUE LED flashes. Run time is now set to 25 min-
utes.
Wait until the BLUE LED on the remote control flashes 5 times. You have now
exited Cold/Hot Start Timer Programming Mode.
3.13 Turbo Timer
(Hold Brake Pedal. Press and release Function Button 4 times and then press
and release Remote Start Button)
This feature will allow turbocharged or supercharged vehicles to cool down by
idling the engine for a specified amount of time. The engine will continue to idle
after the key is turned to the OFF position.
Zenesis Electronics developed patent-pending ZMATIC Intelligent Turbo Timer
that allows users to select 4 different settings for Turbo Timer.
There are 4 settings for the Turbo Timer: OFF (default)
→
ON
→
Auto (Normal)
→
Auto (Extreme).
You can access each setting by going through the process (Hold Brake Pedal.
Press Function Button 4 times and then press Remote Start Button) each time.
Each time you press the Button Sequence, the system will cycle to the next set-
ting. Each setting also has siren chirps/parking light flashes & remote control
